Android 9以太网与WIFI共存

Android 9以太网与WIFI共存

常规方法是的把以下注释就可以了,实际操作起来有差异:
frameworks\base\services\core\java\com\android\server
ConnectivityService.java

 private void teardownUnneededNetwork(NetworkAgentInfo nai) {
        if (nai.numRequestNetworkRequests() != 0) {
            for (int i = 0; i < nai.numNetworkRequests(); i++) {
                NetworkRequest nr = nai.requestAt(i);
                // Ignore listening requests.
                if (nr.isListen()) continue;
                loge("Dead network still had at least " + nr);
                break;
            }
        }
      //  nai.asyncChannel.disconnect();
    }
private class NetworkStateTrackerHandler extends Handler {
        public NetworkStateTrackerHandler(Looper looper) {
            super(looper);
        }

        private boolean maybeHandleAsyncChannelMessage(Message msg) {
            switch (msg.what) {
                default:
                    return false;
                case AsyncChannel.CMD_CHANNEL_HALF_CONNECTED: {
                    handleAsyncChannelHalfConnect(msg);
                    break;
                }
                case AsyncChannel.CMD_CHANNEL_DISCONNECT: {
                    NetworkAgentInfo nai = mNetworkAgentInfos.get(msg.replyTo);
                //    if (nai != null) nai.asyncChannel.disconnect();
                    break;
                }
                case AsyncChannel.CMD_CHANNEL_DISCONNECTED: {
                    handleAsyncChannelDisconnected(msg);
                    break;
                }
            }
            return true;
        }

frameworks\base\core\java\android\net
NetworkFactory.java

 private void evalRequest(NetworkRequestInfo n) {
        if (VDBG) log("evalRequest");
        if (n.requested == false && n.score < mScore &&
                n.request.networkCapabilities.satisfiedByNetworkCapabilities(
                mCapabilityFilter) && acceptRequest(n.request, n.score)) {
            if (VDBG) log("  needNetworkFor");
            needNetworkFor(n.request, n.score);
            n.requested = true;
        } else if (n.requested == true &&
                (n.score > mScore || n.request.networkCapabilities.satisfiedByNetworkCapabilities(
                mCapabilityFilter) == false || acceptRequest(n.request, n.score) == false)) {
            if (VDBG) log("  releaseNetworkFor");
//            releaseNetworkFor(n.request);
//            n.requested = false;
        } else {
            if (VDBG) log("  done");
        }
    }

以上是常规操作,实现以太网与WIFI共存。
实际场景是以太网连接一个摄像头,实时传输视频。
连接摄像头传输视频正常,WIFI上网也正常。
不正常情况:以上基础上,关闭WIFI开关,再打开,视频会断几秒,看log:

07-05 08:54:10.598 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.WIFI_STATE_CHANGED flg=0x4000010 (has extras) } to com.qualcomm.update/.StartNetWorkUpdate
07-05 08:54:10.599 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.WIFI_STATE_CHANGED flg=0x4000010 (has extras) } to com.qualcomm.update/.background.NetworkConnectChangedReceiver
07-05 08:54:10.622 +0000  1438  1631 E WifiP2pService: Unhandled message { when=0 what=131203 target=com.android.internal.util.StateMachine$SmHandler }
07-05 08:54:10.631 +0000  1438  1631 E WifiP2pService: Unhandled message { when=0 what=131203 target=com.android.internal.util.StateMachine$SmHandler }
07-05 08:54:11.481 +0000   923   923 W wificond: Scan is not started. Ignore abort request
07-05 08:54:11.510 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.StartNetWorkUpdate
07-05 08:54:11.510 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.background.NetworkConnectChangedReceiver
07-05 08:54:11.539 +0000  1438  1460 I EthernetTracker: interfaceLinkStateChanged, iface: wlan0, up: false
07-05 08:54:11.541 +0000  1438  1460 I chatty  : uid=1000(system) android.fg identical 2 lines
07-05 08:54:11.541 +0000  1438  1460 I EthernetTracker: interfaceLinkStateChanged, iface: wlan0, up: false
07-05 08:54:11.544 +0000  1438  1460 I EthernetTracker: interfaceLinkStateChanged, iface: wlan0, up: true
07-05 08:54:11.554 +0000  1438  1460 I chatty  : uid=1000(system) android.fg identical 6 lines
07-05 08:54:11.554 +0000  1438  1460 I EthernetTracker: interfaceLinkStateChanged, iface: wlan0, up: true
07-05 08:54:11.557 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.StartNetWorkUpdate
07-05 08:54:11.557 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.background.NetworkConnectChangedReceiver
07-05 08:54:11.558 +0000  1438  1600 D ConnectivityService: registerNetworkAgent NetworkAgentInfo{ ni{[type: WIFI[], state: CONNECTING/CONNECTING, reason: (unspecified), extra: (none), failover: false, available: true, roaming: false]}  network{106}  nethandle{458672230413}  lp{{InterfaceName: wlan0 LinkAddresses: [192.168.50.253/24,]  Routes: [192.168.50.0/24 -> 0.0.0.0 wlan0,0.0.0.0/0 -> 192.168.50.1 wlan0,] DnsAddresses: [192.168.50.1,] UsePrivateDns: false PrivateDnsServerName: null Domains: null MTU: 0 TcpBufferSizes: 524288,1048576,2097152,262144,524288,1048576}}  nc{[ Transports: WIFI Capabilities: NOT_METERED&INTERNET&NOT_RESTRICTED&TRUSTED&NOT_VPN&NOT_ROAMING&FOREGROUND&NOT_CONGESTED&NOT_SUSPENDED Unwanted:  LinkUpBandwidth>=1048576Kbps LinkDnBandwidth>=1048576Kbps SSID: "ASUS_5G"]}  Score{20}  everValidated{false}  lastValidated{false}  created{false} lingering{false} explicitlySelected{false} acceptUnvalidated{false} everCaptivePortalDetected{false} lastCaptivePortalDetected{false} clat{null} }
07-05 08:54:11.559 +0000  1438  1635 D ConnectivityService: NetworkAgentInfo [WIFI () - 106] EVENT_NETWORK_INFO_CHANGED, going from null to CONNECTING
07-05 08:54:11.561 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.StartNetWorkUpdate
07-05 08:54:11.563 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.background.NetworkConnectChangedReceiver
07-05 08:54:11.584 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.RSSI_CHANGED flg=0x4000010 (has extras) } to com.qualcomm.update/.StartNetWorkUpdate
07-05 08:54:11.586 +0000  1438  1635 D ConnectivityService: NetworkAgentInfo [WIFI () - 106] EVENT_NETWORK_INFO_CHANGED, going from CONNECTING to CONNECTING
07-05 08:54:11.625 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.StartNetWorkUpdate
07-05 08:54:11.625 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.background.NetworkConnectChangedReceiver
07-05 08:54:11.639 +0000  1438  1635 D ConnectivityService: NetworkAgentInfo [WIFI () - 106] EVENT_NETWORK_INFO_CHANGED, going from CONNECTING to CONNECTED
07-05 08:54:11.640 +0000  1438  1635 W DnsManager: updatePrivateDns(106, PrivateDnsConfig{true:/[]})
07-05 08:54:11.640 +0000  1438  1635 D ConnectivityService: Setting DNS servers for network 106 to [/192.168.50.1]
07-05 08:54:11.640 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.StartNetWorkUpdate
07-05 08:54:11.640 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.background.NetworkConnectChangedReceiver
07-05 08:54:11.640 +0000  1438  1635 D DnsManager: setDnsConfigurationForNetwork(106, [192.168.50.1], [], [1800, 25, 8, 64], , [192.168.50.1])
07-05 08:54:11.642 +0000  1438  1635 D ConnectivityService: Adding iface wlan0 to network 106
07-05 08:54:11.647 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.StartNetWorkUpdate
07-05 08:54:11.650 +0000  1438  1454 W BroadcastQueue: Background execution not allowed: receiving Intent { act=android.net.wifi.STATE_CHANGE flg=0x4000010 (has extras) } to com.qualcomm.update/.background.NetworkConnectChangedReceiver
07-05 08:54:11.664 +0000  1438  1635 D ConnectivityService: Setting DNS servers for network 106 to [/192.168.50.1]
07-05 08:54:11.665 +0000  1438  1635 D DnsManager: setDnsConfigurationForNetwork(106, [192.168.50.1], [], [1800, 25, 8, 64], , [192.168.50.1])
07-05 08:54:11.709 +0000  1438  1635 D ConnectivityService: NetworkAgentInfo [WIFI () - 106] validation passed
07-05 08:54:11.713 +0000  1438  1635 D ConnectivityService: Switching to new default network: NetworkAgentInfo{ ni{[type: WIFI[], state: CONNECTED/CONNECTED, reason: (unspecified), extra: (none), failover: false, available: true, roaming: false]}  network{106}  nethandle{458672230413}  lp{{InterfaceName: wlan0 LinkAddresses: [192.168.50.253/24,]  Routes: [fe80::/64 -> :: wlan0,192.168.50.0/24 -> 0.0.0.0 wlan0,0.0.0.0/0 -> 192.168.50.1 wlan0,] DnsAddresses: [192.168.50.1,] UsePrivateDns: false PrivateDnsServerName: null Domains: null MTU: 0 TcpBufferSizes: 524288,1048576,2097152,262144,524288,1048576}}  nc{[ Transports: WIFI Capabilities: NOT_METERED&INTERNET&NOT_RESTRICTED&TRUSTED&NOT_VPN&VALIDATED&NOT_ROAMING&FOREGROUND&NOT_CONGESTED&NOT_SUSPENDED Unwanted:  LinkUpBandwidth>=1048576Kbps LinkDnBandwidth>=1048576Kbps SignalStrength: -91 SSID: "ASUS_5G"]}  Score{41}  everValidated{true}  lastValidated{true}  created{true} lingering{false} explicitlySelected{false} acceptUnvalidated{false} everCaptivePortalDetected{false} lastCaptivePortalDetected{false} clat{null} }
07-05 08:54:11.714 +0000   918  1140 E NetlinkEvent: NetlinkEvent::FindParam(): Parameter 'INTERFACE' not found
07-05 08:54:11.714 +0000   918  1140 E NetlinkEvent: NetlinkEvent::FindParam(): Parameter 'STATE' not found
07-05 08:54:11.714 +0000   918  1140 E NetlinkEvent: NetlinkEvent::FindParam(): Parameter 'TIME_NS' not found
07-05 08:54:11.714 +0000   918  1140 E NetlinkEvent: NetlinkEvent::FindParam(): Parameter 'UID' not found
07-05 08:54:11.759 +0000  1438  1635 D ConnectivityService: Lingering NetworkAgentInfo [Ethernet () - 105] for 30000ms
07-05 08:54:11.759 +0000  1438  1635 D ConnectivityService: Sending DISCONNECTED broadcast for type 9 NetworkAgentInfo [Ethernet () - 105] isDefaultNetwork=true
07-05 08:54:11.760 +0000  1438  1635 D ConnectivityService: Sending CONNECTED broadcast for type 1 NetworkAgentInfo [WIFI () - 106] isDefaultNetwork=true
07-05 08:54:11.763 +0000  1788  1788 E SystemUIService: SystemUIService NetworkChangeReceiver 
07-05 08:54:11.763 +0000  1788  1788 E SystemUIService: SystemUIService  Connected to WIFI  mFlay:false
07-05

以上分析出,打开WIFI开关连接时,会发送断开以太网的广播,然后又将以太网连接上:

07-05 08:54:11.759 +0000  1438  1635 D ConnectivityService: Sending DISCONNECTED broadcast for type 9 NetworkAgentInfo [Ethernet () - 105] isDefaultNetwork=true
07-05 08:54:11.760 +0000  1438  1635 D ConnectivityService: Sending CONNECTED broadcast for type 1 NetworkAgentInfo [WIFI () - 106] isDefaultNetwork=true

这个应该就是视频断开一下,再连接上的原因。

解决思路,在以太网口连接时,不发送断开以太网的广播。
还是在
frameworks\base\services\core\java\com\android\server
ConnectivityService.java

public void add(int type, NetworkAgentInfo nai) {
            if (!isTypeSupported(type)) {
                return;  // Invalid network type.
            }
            if (VDBG) log("Adding agent " + nai + " for legacy network type " + type);

            ArrayList<NetworkAgentInfo> list = mTypeLists[type];
            if (list.contains(nai)) {
                return;
            }
            synchronized (mTypeLists) {
                list.add(nai);
            }

            // Send a broadcast if this is the first network of its type or if it's the default.
            final boolean isDefaultNetwork = isDefaultNetwork(nai);
//			if ((list.size() == 1) || isDefaultNetwork){
            if (((list.size() == 1) || isDefaultNetwork) && !isEthernetConnected()) {//连接WIFI时断开以太网
                maybeLogBroadcast(nai, DetailedState.CONNECTED, type, isDefaultNetwork);
                sendLegacyNetworkBroadcast(nai, DetailedState.CONNECTED, type);
            }
        }
 /** Removes the given network from the specified legacy type list. */
        public void remove(int type, NetworkAgentInfo nai, boolean wasDefault) {
            ArrayList<NetworkAgentInfo> list = mTypeLists[type];
            if (list == null || list.isEmpty()) {
                return;
            }
            final boolean wasFirstNetwork = list.get(0).equals(nai);

            synchronized (mTypeLists) {
                if (!list.remove(nai)) {
                    return;
                }
            }

            final DetailedState state = DetailedState.DISCONNECTED;
//			if (wasFirstNetwork || wasDefault) {
            if ((wasFirstNetwork || wasDefault)&& !isEthernetConnected()) {//连接WIFI时断开以太网
                maybeLogBroadcast(nai, state, type, wasDefault);
                sendLegacyNetworkBroadcast(nai, state, type);
            }

            if (!list.isEmpty() && wasFirstNetwork) {
                if (DBG) log("Other network available for type " + type +
                              ", sending connected broadcast");
                final NetworkAgentInfo replacement = list.get(0);
                maybeLogBroadcast(replacement, state, type, isDefaultNetwork(replacement));
                sendLegacyNetworkBroadcast(replacement, state, type);
            }
        }
private boolean isEthernetConnected() {
			try {
				List<NetworkInterface> interfaces = Collections.list(NetworkInterface.getNetworkInterfaces());
				for (NetworkInterface intf : interfaces) {
					if (intf.getName().startsWith("eth")) {
						if (intf.isUp()) {
							android.util.Log.d(TAG, "isEthernetConnected:true");
							return true;
						}
					}
				}
			} catch (Exception e) {
				e.printStackTrace();
			}
			android.util.Log.d(TAG, "isEthernetConnected:false");
			return false;
		}

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.mfbz.cn/a/779957.html

如若内容造成侵权/违法违规/事实不符,请联系我们进行投诉反馈qq邮箱809451989@qq.com,一经查实,立即删除!

相关文章

每日一题~oj(贪心)

对于位置 i来说&#xff0c;如果 不选她&#xff0c;那她的贡献是 vali-1 *2&#xff0c;如果选他 &#xff0c;那么她的贡献是 ai. 每一个数的贡献 是基于前一个数的贡献 来计算的。只要保证这个数的前一个数的贡献是最优的&#xff0c;那么以此类推下去&#xff0c;整体的val…

基于自编码器的时间序列异常检测方法(以传感器数据为例,MATLAB R2021b)

尽管近年来研究者对自编码器及其改进算法进行了深入研究&#xff0c;但现阶段仍存在以下问题亟须解决。 1) 无监督学习模式对特征提取能力的限制与有监督学习相比&#xff0c;无监督学习模式摆脱了对样本标签的依赖、避免了人工标注的困难&#xff0c;但也因此失去了样本标签的…

vue3+vite搭建第一个cesium项目详细步骤及环境配置(附源码)

文章目录 1.创建vuevite项目2.安装 Cesium2.1 安装cesium2.2 安装vite-plugin-cesium插件&#xff08;非必选&#xff09;2.3 新建组件页面map.vue2.4 加载地图 3.完成效果图 1.创建vuevite项目 打开cmd窗口执行以下命令&#xff1a;cesium-vue-app是你的项目名称 npm create…

Zkeys三方登录模块支持QQ、支付宝登录

1&#xff0c;覆盖到根目录&#xff0c;并导入update.sql数据库文件到Zkeys数据库里 2. 后台系统权限管理&#xff0c;配置管理员权限-系统类别-找到云外科技&#xff0c;全部打勾 3&#xff0c;后台系统设置找到云外快捷登录模块填写相应的插件授权配置和登录权限配置&#x…

【wordpress教程】wordpress博客网站添加非法关键词拦截

有的网站经常被恶意搜索&#xff0c;站长们不胜其烦。那我们如何屏蔽恶意搜索关键词呢&#xff1f;下面就随小编一起来解决这个问题吧。 后台设置预览图&#xff1a; 设置教程&#xff1a; 1、把以下代码添加至当前主题的 functions.php 文件中&#xff1a; add_action(admi…

Arcgis Api 三维聚合支持最新版API

Arcgis Api 三维聚合支持最新版API 最近有同学问我Arcgis api 三维聚合&#xff0c;官方还不支持三维聚合API&#xff0c;二维可以。所以依旧是通过GraphicLayers 类来实现&#xff0c;可支持最新Arcgis Api版本 效果图&#xff1a;

简单且循序渐进地查找软件中Bug的实用方法

“Bug”这个词常常让许多开发者感到头疼。即使是经验丰富、技术娴熟的开发人员在开发过程中也难以避免遭遇到 Bug。 软件中的故障会让程序员感到挫败。我相信在你的软件开发生涯中&#xff0c;也曾遇到过一些难以排查的问题。软件中的错误可能会导致项目无法按时交付。因此&…

初识STM32:芯片基本信息

STM32简介 STM32是ST公司基于ARM公司的Cortex-M内核开发的32位微控制器。 ARM公司是全球领先的半导体知识产权&#xff08;IP&#xff09;提供商&#xff0c;全世界超过95%的智能手机和平板电脑都采用ARM架构。 ST公司于1987年由意大利的SGS微电子与法国的Thomson半导体合并…

linux软链接和硬链接的区别

1 创建软链接和硬链接 如下图所示&#xff0c;一开始有两个文件soft和hard。使用 ln -s soft soft1创建软链接&#xff0c;soft1是soft的软链接&#xff1b;使用ln hard hard1创建硬链接&#xff0c;hard1是hard的硬链接。可以看到软链接的文件类型和其它3个文件的文件类型是不…

从“移花接木”到“提质增效”——详解嫁接打印技术

嫁接打印&#xff0c;是融合了3D打印与传统制造精髓的创新技术&#xff0c;其核心在于&#xff0c;通过巧妙地将传统模具加工与先进的3D打印技术相结合&#xff0c;实现了模具制造的“提质、增效、降本”。 嫁接打印的定义 简而言之&#xff0c;嫁接打印是一种增减材混合制造的…

uniapp报错--app.json: 在项目根目录未找到 app.json

【问题】 刚创建好的uni-app项目&#xff0c;运行微信小程序控制台报错如下&#xff1a; 【解决方案】 1. 程序根目录打开project.config.json文件 2. 配置miniprogramRoot&#xff0c;指定小程序代码的根目录 我的小程序代码编译后的工程文件目录为&#xff1a;dist/dev/mp…

阿里云Elasticsearch-趣味体验

阿里云Elasticsearch-趣味体验 什么是阿里云Elasticsearch阿里云Elasticsearch开通服务查看Elasticsearch实例配置Kibana公网IP登录Elasticsearch添加测试数据 Kibana数据分析查看数据字段筛选数据页面条件筛选KQL语法筛选保存搜索语句导出筛选结果指定列表展示字段写在最后 什…

multisim中关于74ls192n和DSWPK开关仿真图分析(减法计数器)

&#x1f3c6;本文收录于「Bug调优」专栏&#xff0c;主要记录项目实战过程中的Bug之前因后果及提供真实有效的解决方案&#xff0c;希望能够助你一臂之力&#xff0c;帮你早日登顶实现财富自由&#x1f680;&#xff1b;同时&#xff0c;欢迎大家关注&&收藏&&…

DAMA学习笔记(四)-数据建模与设计

1.引言 数据建模是发现、分析和确定数据需求的过程&#xff0c;用一种称为数据模型的精确形式表示和传递这些数据需求。建模过程中要求组织发现并记录数据组合的方式。数据常见的模式: 关系模式、多维模式、面向对象模式、 事实模式、时间序列模式和NoSQL模式。按照描述详细程度…

实现资产优化管理:智慧校园资产分类功能解析

在构建智慧校园的过程中&#xff0c;细致入微的资产管理是确保教育资源高效运作的关键一环&#xff0c;而资产分类功能则扮演着举足轻重的角色。系统通过精心设计的分类体系&#xff0c;将校园内的各类资产&#xff0c;从昂贵的教学设备到日常使用的办公物资&#xff0c;乃至无…

S32DS S32 Design Studio for S32 Platform 3.5 代码显示行号与空白符

介绍 NXP S32DS&#xff0c;全称 S32 Design Studio&#xff0c;s32 系列芯片默认使用 S32 Design Studio for S32 Platform 作为 IDE 集成开发环境&#xff0c;当前版本 S32 Design Studio for S32 Platform 3.5&#xff0c;IDE 可以简称 s32DS 使用 S32DS&#xff0c;可以认…

数据结构算法-排序(一)-冒泡排序

什么是冒泡排序 冒泡排序&#xff1a;在原数组中通过相邻两项元素的比较&#xff0c;交换而完成的排序算法。 算法核心 数组中相邻两项比较、交换。 算法复杂度 时间复杂度 实现一次排序找到最大值需要遍历 n-1次(n为数组长度) 需要这样的排序 n-1次。 需要 (n-1) * (n-1) —…

240706_昇思学习打卡-Day18-基于MindSpore的GPT2文本摘要

240706_昇思学习打卡-Day18-基于MindSpore的GPT2文本摘要 今天做一个根据一段文章提取摘要的提取器&#xff0c;基于nlpcc2017摘要数据&#xff0c;内容为新闻正文及其摘要&#xff0c;就是训练集及标签。 首先我们来预装以下MindSpore环境 %%capture captured_output # 实验…

昇思MindSpore学习笔记4-05生成式--Pix2Pix实现图像转换

摘要&#xff1a; 记录昇思MindSpore AI框架使用Pix2Pix模型生成图像、判断图像真实概率的原理和实际使用方法、步骤。包括环境准备、下载数据集、数据加载和处理、创建cGAN神经网络生成器和判别器、模型训练、模型推理等。 一、概念 1.Pix2Pix模型 条件生成对抗网络&#x…

IDEA常用技巧荟萃:精通开发利器的艺术

1 概述 在现代软件开发的快节奏环境中,掌握一款高效且功能全面的集成开发环境(IDE)是提升个人和团队生产力的关键。IntelliJ IDEA,作为Java开发者的首选工具之一,不仅提供了丰富的编码辅助功能,还拥有高度可定制的界面和强大的插件生态系统。然而,要充分发挥其潜力,深…